欢迎光临青岛立中有限公司
全国咨询热线13583252201
您的当前位置:首页>公司新闻>公司新闻
公司新闻
提高尼龙输送带使用寿命需要做到以下几点
发布者:lizhongssd 发布时间:2019/1/7

1.尼龙输送带在运输和储存过程中应保持清洁,避免阳光、雨雪,防止与酸、碱油、有机溶剂等物质接触,并应距加热装置一米。

(1). Nylon conveyor belts should be kept clean during transportation and storage, avoid sunshine, rain and snow, prevent contact with acids, alkali oils, organic solvents and other substances, and should be one meter away from the heating device.

2.在储存过程中,仓库温度应保持在-18-40之间,相对温度应保持在相对湿度的50-80%之间。

(2). During storage, the warehouse temperature should be kept between - 18-40, and the relative temperature should be kept between 50-80% of the relative humidity.

3.在储存期间,产品应成卷放置,而不是折叠,并在储存期间每季度翻转一次。

(3). During storage, the product should be placed in rolls instead of folding, and it should be reversed quarterly during storage.

4.不同类型和规格的输送带不适合连接。接缝最好用胶水粘合。

(4). Conveyor belts of different types and specifications are not suitable for connection. Joints are best bonded with glue.

5.尼龙输送带的类型、结构、规格、层数应根据使用情况合理选择。

(5). The type, structure, specification and number of layers of nylon conveyor belt should be reasonably selected according to the use situation.

6.尼龙输送带不应以2.5 m/s的速度运行。破碎磨损较大的材料和固定式犁式卸料装置应尽可能少地使用。

(6). Nylon conveyor belt should not run at 2.5 m/s speed. Material with larger crushing wear and fixed plough unloading device should be used as little as possible.

7.根据输送机的设计要求,合理选择了传动滚筒直径与皮带层、配料滚筒、换向滚筒的匹配及托辊槽角的要求。

(7). According to the design requirements of the conveyor, the matching of the diameter of the driving drum with the belt layer, the proportioning drum, the reversing drum and the requirements of the groove angle of the idler are reasonably selected.

8.送料方向应与皮带运行方向一致。为了减少落料对皮带的冲击,应采用溜槽减小落料距离。皮带送料段应缩短托辊间距,采用缓冲托辊。为防止物料泄漏,皮带侧应使用软质和中质挡板,避免挡板倒转,划伤皮带表面。

(8) .The feeding direction should be consistent with the belt running direction. In order to reduce the impact of blanking on belt, chute should be used to reduce the blanking distance. The belt feeding section should shorten the distance between idlers and adopt buffer idlers. In order to prevent material leakage, soft and medium baffles should be used on the side of the belt to avoid reverse baffles and scratch the surface of the belt.

上条新闻:尼龙输送带防撕裂

版权所有© 2014立中橡胶保留一切权利 备案号:鲁ICP备16038720号-1 技术支持:立中
服务热线:13583252201 邮箱:lizhongssd@163.com